AS31150 ml
Medium-Strength Removable Threadlocker, Blue
A one-component anaerobic compound intended for the locking and sealing of threaded joints that require regular servicing with hand tools and are subject to vibration and shock loads.
The AXIOM® AS311 threadlocker prevents fasteners from loosening and self-unscrewing. It is resistant to automotive service fluids (oil, brake fluid, antifreeze, petrol, diesel fuel, etc.). It polymerises without access to air in gaps up to 0.13 mm. The operating temperature range of the cured threadlocker is from –60°C to +180°C. The breakaway torque on an untightened threaded pair is not more than 25 N·m. Shear strength — 8.3 MPa (1200 psi). Intended for fasteners up to M20 in size. Blog article →
- Prevents loosening caused by vibration and shock loads
- Seals. Protects threaded joints from corrosion
- Allows the joint to be dismantled with hand tools if necessary
- For threaded joints up to M20 in size
- Initial strength: 10-15 minutes
- Full polymerisation: 24 hours
- Shear strength: 8.3 MPa (1200 psi)
- Operating temperature range from –60°C to +180°C
- Work is recommended at an ambient temperature between +5°C and +30°C and a threadlocker temperature of +15…20°C.
- Before applying the compound, clean and degrease the surfaces with A9601 “Brake and clutch parts cleaner”. Dry them.
- Shake the bottle thoroughly. Remove the cap and cut off the tip.
- Spread the required amount of compound over the entire surface of the external thread. For blind joints, apply a few drops of the compound directly into the threaded hole.
- Assemble the joint and leave it until cured.
- Remove excess product with a rag.
Initial strength – after 10‑15 minutes (at a temperature of 20°C); full polymerisation time – 24 hours. To make dismantling easier, heat the joint to 250‑350°C with a heat gun or a blowtorch.
| Content | 50 ml |
|---|---|
| Color | Blue |
| Shear strength | 8.3 MPa (1200 psi) |
| Initial strength | 10-15 minutes |
| Full polymerisation | 24 hours |
| Shelf Life | 2 years |
| Storage | In hermetically sealed packaging in covered dry ventilated premises at a temperature from +5°C to +25°C. Storage at temperatures outside the specified range may adversely affect the properties of the product. |
| Composition | Methacrylic acid esters, polymerisation inhibitor, colourant |
| EAN-13 | 4606445041941 |
There are no questions about this product yet.