AS510.150 ml
High-Temperature Anaerobic Flange Sealant
A one-component anaerobic sealant for metal flange joints with a gap of up to 0.25 mm. It has thixotropic viscosity and is able to polymerise in the absence of oxygen.
The AXIOM® AS510.1 high-temperature flange sealant is resistant to various service fluids, including petrol and diesel. It can be used on metals of differing activity, including aluminium with a low copper content. It is characterised by high chemical and temperature resistance (–60°C…+204°C).
It leaves no oil deposits, seals or scale on the surface. It does not cause corrosion. It is not recommended for use on plastics, especially on thermoplastics, because of the possibility of their destruction.
- Work is recommended at an ambient temperature between +5°C and +40°C and a sealant temperature of +20…25°C.
- Before applying the compound, clean and degrease the surfaces with A9610 “Fast cleaner” or A9690 “Degreaser. Silicone remover”. Dry them.
- Shake the tube thoroughly. Remove the cap and cut off the tip.
- Apply the sealant as a continuous uniform bead 2–3 mm thick to one of the surfaces, first — along the inner perimeter, then — around the fastener holes.
- To prevent the parts from possible displacement they must be tightened.
- Remove excess product with a rag.
- If necessary, check the tightness of the joint with low-pressure air (up to 0.1 bar).
- To dismantle the joint it is recommended to use hand tools together with local heating.
If the joint needs to be dismantled, it is recommended to use hand tools together with local heating.
| Content | 50 ml |
|---|---|
| Color | Red |
| Temperature resistance | –60°C…+204°C |
| Gaps | up to 0.25 mm |
| Shelf Life | 2 years |
| Storage | In hermetically sealed packaging in covered dry ventilated premises at a temperature from +8°C to +28°C. Storage at temperatures outside the specified range may adversely affect the properties of the product. |
| Composition | Methacrylic acid esters, polymerisation inhibitor, colourant. |
| EAN-13 | 4606445052534 |
Михаил – :
Здравствуйте. Возможно ли применение AS510.150 мл
Герметик фланцевый высокотемпературный для клапанных крышек гбц? Вопрос именно про этот герметик потому, что на двигателе ВАЗ-21129 в качестве уплотнения (прокладки) крышки головки блока цилиндров используется герметик для фланцевых соединений Анатерм-501 (АН-501) или Loctite 574.
axiom – :
Да, этот герметик можно применять для установки клапанной крышки ГБЦ
Андрей – :
Добрый день! Возможно ли использовать данный герметик для клапанной крышки и масло отделителя двигателя к4м Рено. Производителем указано применение локтайт 518. Какой герметик предпочтительнее из вашей линейки 510 или 518.
axiom – :
Наш 518-й герметик можно использовать вместо Loctite 518
Григорий – :
Через какое время герметик застывает после нанесения?
axiom – :
Время начальной фиксации, мин 2–3
Полное отверждение, ч 24