PU adhesive for automotive glass bonding ABK413
ABK413280 ml

1K Polyurethane Auto Glass Adhesive

The AXIOM® ABK413 one-component high-modulus polyurethane-based adhesive sealant has high bonding strength, water and oil resistance and resistance to ageing, and it withstands vibration loads throughout its entire service life. It has excellent adhesion to glass and metal and high initial tensile strength on glass and metal surfaces.

It is used for creating high-strength bonded joints when installing and sealing windscreens and perimeter glazing of vehicles in passenger car, truck and commercial vehicle engineering. It is suitable for use in marine and railway transport. It can be painted.

It allows the vehicle to be driven safely 1 hour after the glass has been bonded.

Technical data sheet →
  • Work should be carried out at a temperature from +5°C to +35°C.
  • Apply the adhesive to clean, degreased surfaces. For degreasing and cleaning, “Silicone remover” A9690 is recommended.
  • For neat work, use masking tape and remove it immediately after the adhesive has been applied.
  • Before use, shake the container of the “Glass bonding primer” APC413 until you hear the ball moving.
  • Treat the bonding zone on the glass with primer. Attention! Do not apply the primer to the surface of freshly cut polyurethane!
  • Cut the tip of the nozzle to the desired size to obtain the required height of the adhesive bead. The V-shaped notch of the nozzle will ensure the correct shape of the bead.
  • It is recommended to use a professional applicator gun.
  • Before applying the adhesive, make sure that the primer has dried.
  • Apply the adhesive to the primed bonding zone of the glass.
  • Fit the glass on the vehicle and position it precisely. Press it so as to ensure full contact with the adhesive around the whole perimeter.
  • Clean the surfaces soiled with freshly applied adhesive with solvent. Remove cured adhesive mechanically.
Color Black
Base PU
Shore A Hardness 65 (GOST 263‑75)
Skin formation time 30 minutes
Equivalents Teroson 8590, SikaTack Drive, SOUDAL CARBOND 940FC, BOSTIC 7008, 3M 08613
Curing rate Allows the vehicle to be driven safely 1 hour after glass bonding
Shelf Life 9 months
Storage In the hermetically sealed original packaging in a dry place at a temperature from +5°C to +30°C
Units per Box 12 pieces
Composition diphenylmethane diisocyanate-based polyurethane prepolymer, mineral fillers, functional additives, pigments
EAN-13 4606445047868
State registration certificate

  1. Наталья – :

    Добрый день. Уточните пожалуйста какие нагрузки выдерживает. Можно ли подклеить стекло прицела охотничьего. Не вылетит при отдаче?

    • axiom – :

      Прочность на растяжение при разрыве 8 МПа, при сдвиге 3,5 МПа

  2. Дмитрий – :

    Добрый день. Уточните пожалуйста при каких температурах можно эксплуатировать склеинные детали?

    • axiom – :

      Температура эксплуатации клеевого шва от -40 до +70ºС

PART NUMBER: ABK413 CATEGORIES: , ,

Part of the system

We also recommend