A9108940 ml
Diesel Injection System Flush Fluid
Professional product intended for flushing the injection system of diesel engines without dismantling. The diesel injection system flush AXIOM® A9108 restores the injector spray pattern and thereby normalises the operation of the engine. It reduces fuel and oil consumption and increases compression in the cylinders. The product is suitable for all types of diesel engines and injection systems, including Common Rail. It is safe for flushing benches, spark plugs and catalytic converters. After use no oil change is required.
It is recommended to use the product every 15 000 - 20 000 kilometres of mileage.
Attention! The product is not intended for pouring into the vehicle fuel tank.
- Connect the flushing station to the fuel system in place of the standard tank.
- Pour the product into the flushing station.
- Start the engine and let it run for 15-20 minutes at idle.
- Stop the engine and wait 10-15 minutes for the product to act.
- Start the engine and, periodically raising the engine speed to 1500-2000 rpm, use up the remaining product.
- After flushing is complete, disconnect the station from the vehicle fuel system and connect the standard fuel tank.
| Content | 940 ml |
|---|---|
| Shelf Life | 2 years |
| Composition | Naphthenic hydrocarbons >30%, aliphatic hydrocarbons <30%, aromatic hydrocarbons <30%, 2‑ethylhexyl nitrate <15%, polyisobutylene-based detergent <5%, corrosion inhibitor <5%. |
| Technical Specification | 2384-026-53934955-11 |
| EAN-13 | 4606445041705 |
Мария – :
Добрый день!
Подскажите, пожалуйста, как влияет продукт А9108 на работу нейтралитических катализаторов и сажевых фильтров ( в том числе систем с впрыском мочевины).
axiom – :
Никак не влияет