A9302335 ml
5-Minute Engine Oil System Flush
High-quality five-minute flush AXIOM® A9302 for flushing the lubrication system of diesel and petrol internal combustion engines in all types of vehicles and stationary units. Thanks to a combination of detergent-dispersant additives it removes all kinds of deposits and solids insoluble in oil: carbon deposits, sludge, coke and lacquer formations. During flushing, the oil channels, the sump, the piston rings, the hydraulic lifters and other engine assemblies are cleaned. Used before changing the engine oil. One bottle of the product is sufficient for an oil system with a volume of up to 6 litres. For engines with an oil system volume of less than 3 l use half a bottle.
- Warm the engine up to operating temperature, switch the engine off, pour the contents of the bottle into the oil filler neck.
- Screw on the oil filler cap and run the engine for 5–7 minutes at idle speed (if the engine oil has not been changed for a long time or there are signs of heavy contamination of the oil system, the cleaning time may be increased to 15–20 min).
- Switch the engine off. Observing the safety precautions, drain the used oil.
- Be sure to replace the oil filter. Fill with fresh engine oil.
Attention! During cleaning the engine must run at idle speed!
| Content | 335 ml |
|---|---|
| Shelf Life | 3 years |
| Composition | Aliphatic hydrocarbons >30%, naphthenic hydrocarbons >30%, non-ionic surfactants <5%, anionic surfactants <5%, zinc dithiophosphate <5%, aromatic hydrocarbons <5% |
| Technical Specification | 2384-026-53934955-11 |
| EAN-13 | 4606445024821 |
Артём – :
Разрешил ли использовать данное средство при условии что поддон авто окрашен изнутри. Не поднимет ли краску?
axiom – :
Не поднимет