ABK543280 ml
AXIOM® BOND Hybrid Polymer Adhesive Sealant, Black (Shore A 60)
A structural industrial one-component high-modulus adhesive sealant intended for creating high-strength, permanently elastic bonded joints and sealing seams in transport and industrial mechanical engineering. It is suitable for sealing joint seams subject to vibration loads.
AXIOM® BOND ABK543 is used in the manufacture and repair of commercial vehicles for mounting the body components of buses, trucks and passenger cars and special-purpose vehicles (cash-in-transit vans, ambulances, refrigerated vehicles, as well as motorhomes and trailers). It is widely used in the assembly of marine transport (components above the waterline), railway carriages, air conditioning and ventilation systems, etc.
It withstands compression, tension and shear. It reduces vibration and noise, is resistant to loads and is perfectly suited to bonding materials with different thermal expansion. Shore A hardness (GOST 263-75) — 60.
- It has excellent adhesion to most materials, such as aluminium, metals, alloys, stainless steel, PVC, rigid plastics (except PE, PP and PTFE), wood, as well as stone, concrete, glass, ceramics and plasterboard.
- Environmentally safe, non-toxic and non-flammable, it contains no isocyanates or solvents.
- It forms a strong, permanently elastic, durable seam.
- It requires no preliminary priming.
- Thixotropic, it does not run or sag along the seam.
- After curing it can be painted with water-based and synthetic paints (when using solvent-based paints, carry out a test).
- It does not shrink or form bubbles.
- Chemically neutral, it does not cause corrosion.
- Resistant to weathering and temperature fluctuations.
- Wide operating temperature range: from –60°C to +110°C.
- Not suitable for continuous immersion in water.
- Work is recommended at a temperature between +5°C and +35°C.
- Apply the adhesive to clean, degreased surfaces.
- For neat work, use masking tape and remove it immediately after applying the adhesive.
- Cut off the screw head of the tube above the thread, screw on the nozzle, unscrew the cap and cut the nozzle tip at an angle of 45° so that an opening sufficient for dispensing is formed.
- Apply the adhesive to the elements to be bonded in strips at intervals of 5–15 cm to provide ventilation. Use a caulking gun for application.
- Press the element to be bonded against the mounting point and position it precisely. If necessary, provide temporary fixing. Full curing takes place under the action of atmospheric moisture within 5–7 days.
- Skin formation time — at least 15 minutes, adhesive curing rate — 3–4 mm per day (at a temperature of +23°C and a relative humidity of 50%).
- Clean surfaces contaminated with freshly applied adhesive using a solvent (acetone, white spirit). Remove cured adhesive mechanically.
- Bonded items may be used at temperatures between –60°C and +100°C.
Attention! Do not use on surfaces where contact with food is possible. Not suitable for continuous immersion in water.
| Color | Black |
|---|---|
| Base | Hybrid |
| Shore A Hardness | 60 (GOST 263‑75) |
| Skin formation time | 15 minutes |
| Equivalents | Terostat MS 939 FR, Sikaflex®-221, SabatacK 760, TENABOND 341M, SOUDASEAL HT, BOSTIC ISR 7005 |
| Shelf Life | 12 months |
| Storage | In the hermetically sealed original packaging in a dry place at a temperature from +5°C to +25°C. Freezing down to –20°C for up to 45 days is permitted |
| Units per Box | 12 pieces |
| Composition | hybrid polymer, mineral fillers, functional additives, pigments |
Владимир – :
Здравствуйте, листы синтетического войлока возможно ли склеить между собой клеем-герметиком на основе гибридных полимеров? Спасибо.
axiom – :
Скорее всего можно
Иван – :
Здравствуйте, не нашел свойства маслостойкости в описании и технических характеристиках. Прошу уточнить насколько продукт стоек к промышленным маслам/смазкам.
axiom – :
Стойкость практически абсолютная