A4165700 g
2K Lightweight Polyester Body Filler, Light Blue
A two-component lightweight polyester filler. The AXIOM® A4165 filler has high filling capacity, mechanical strength and excellent adhesion to various types of substrate, including galvanised steel. It dries quickly and is easy to sand. It is intended both for spot finishing repairs of small dents and scratches and for filling large flat body panels such as the roof or the bonnet.
Suitable surfaces: steel, aluminium, wood, polyester and epoxy surfaces, old finishing coatings.
- For full information on application see the product TDS.
- For best results, use at a temperature of not below +10°C.
- Before filling, the substrate must be cleaned, dried, degreased and dry sanded with abrasive material (P80 ➡ P280, depending on the substrate being painted).
Steel P80 Aluminium, galvanised substrates P180 Polyester, epoxy substrates P280 Old finish coating P80 ➡ P180 ➡ P280 - Mixing ratios, by volume:
Mix until a homogeneous mass is obtained!
Filler 100 Hardener 2 - Drying time (the temperature of the filler surface is given):
+20°C 15-20 min. IR lamp at a distance of 80-100 cm, at 50% power, <+70°C 2-3 min. - Close the packaging with materials tightly after use.
| Color | Light blue |
|---|---|
| Hardener | Included |
| Coating Base | Polyester |
| Weight | 700 g |
| Composition | Unsaturated polyester resins, solvents, glass fibre, pigments and fillers |
| Shelf Life | 18 months |
| EAN-13 | 4606445049282 |
There are no questions about this product yet.