A4162800 g
2K Finishing Polyester Body Filler, Sand
A two-component polyester finishing filler with a fine filler and a creamy structure. The AXIOM® A4162 filler, thanks to the optimally selected size of its fillers, is easy to apply to any substrate, including galvanised steel, dries quickly without forming pores and is easy to work. It has high filling capacity, mechanical strength and excellent adhesion to various types of substrate. It is used for finishing work and for filling small pores and damage.
Suitable surfaces: steel, aluminium, wood, polyester and epoxy surfaces, old finishing coatings.
- For full information on application see the product TDS.
- For best results, use at a temperature of not below +10°C.
- Before filling, the substrate must be cleaned, dried, degreased and dry sanded with abrasive material (P80 ➡ P280, depending on the substrate being painted).
Steel P80 Aluminium, galvanised substrates P180 Polyester, epoxy substrates P280 Old finish coating P80 ➡ P180 ➡ P280 - Mixing ratios, by volume:
Mix until a homogeneous mass is obtained!
Filler 100 Hardener 2 - Drying time (the temperature of the filler surface is given):
+20°C 15-20 min. IR lamp at a distance of 80-100 cm, at 50% power, <+70°C 2-3 min. - Close the packaging with materials tightly after use.
| Color | Sand |
|---|---|
| Hardener | Included |
| Coating Base | Polyester |
| Weight | 800 g |
| Composition | Fillers and unsaturated polyester resins, solvents, pigments |
| Shelf Life | 18 months |
| EAN-13 | 4606445049251 |
There are no questions about this product yet.