Anti-corrosion acrylic primer 4:1 A4178-1 Anti-corrosion acrylic primer 4:1 A4178-2 Anti-corrosion acrylic primer 4:1 A4178-3
Anti-corrosion acrylic primer 4:1 A4178-1
A41781000 ml

2K Anticorrosive Acrylic Primer, 4:1

A4178-1
Grey
A4178-2
White
A4178-3
Black

Professional tintable acrylic primer AXIOM® A4178-1 for preparing ferrous and non-ferrous metal surfaces for painting.

Creates reliable anti-corrosion protection of metal parts. Thanks to its excellent adhesion, it promotes a firm bond between the topcoat and the painted surface. Provides good pore filling and sands easily, making it possible to obtain quickly a perfect surface free from pores, scratches and irregularities.

Suitable for priming sanded electrophoretic coatings, PE filler, steel surfaces, acid and epoxy primers and old finish
coatings. Can be tinted with basecoat enamels. Can be painted over with any basecoat or 2K enamel.

Used

  • as a pore-filling primer (in the sandable version),
  • «wet on wet» (in the non-sandable version),
  • as a primer tintable with basecoat enamels.
Technical data sheet →
  • For full information on application see the product TDS.
  • For best results, use at a temperature of not below +10°C.
  • Before priming, the substrates must be cleaned, dried, degreased and dry sanded with abrasive material (P80 ➡ P320, depending on the substrate being painted).
  • Protect the surfaces that are not to be primed.
  • Mixing ratios:
    Sandable version, by volume:
    PrimerHardenerThinner
    100255-15

    Non-sandable version (“wet on wet”), by volume:
    PrimerHardenerThinner
    1002530-40

    Tinting with basecoat enamels — up to 10%, by volume:

    PrimerBasecoat enamelHardenerThinner
    10010255-15
  • Equipment for application:
    Sandable version:
    Spray gun typeNozzle, mmPressure, bar
    Medium pressure (for example, RP, HTE, W and others)1.5-1.72.0-2.5

    “Wet on wet”:
    Spray gun typeNozzle, mmPressure, bar
    Low pressure (HVLP, LPH and others)1.3-1.51.8-2.0
    Medium pressure (RP, HTE, W and others)1.3-1.52.0-2.5
  • Apply in 1-3 “wet” coats.
  • Drying between coats – 5 minutes at 20°C.
  • Subsequent treatment: any finishing coatings. Dry sanding with P320 ➡ P500 abrasive material. Wet sanding P600 ➡ P1000.
  • Drying time:
    Temperature, °CTime, min.*
    2090
    6020
Color Grey, White, Black
Coating Base Acrylic
Content 1000 ml
Composition hydroxyl-containing acrylic resins, solvent mixture, pigments, fillers, anti-corrosion and functional additives
Technical Specification 20.30.22-038-53934955-2021
Shelf Life 2 years
EAN-13 4606445047516
State registration certificate Declaration of conformity / Exemption letter

  1. Аркадий – :

    Здравствуйте. Грунтовку A4178 можно наносить на металл имеющий легкую коррозию? Спасибо.

    • axiom – :

      Нет, нужно вначале полностью нейтрализовать коррозию.

PART NUMBER: A4178 CATEGORIES: , ,

Part of the system

We also recommend