A41761000 ml
1K Plastic Adhesion Promoter
The professional 1K plastic primer (adhesion promoter) AXIOM® A4176 is intended for preparing for painting the external and internal parts made of all kinds of plastics used in the manufacture of bumpers, wings, bonnets, decorative trims and other plastic components of a vehicle.
It provides excellent adhesion strength, which is necessary for reliable bonding of the paint coating to the plastic surface being painted.
Suitable for priming and painting with any kinds of primers and enamels. The characteristic gloss of the material makes it possible to control the application area and the priming thickness.
- For full information on application see the product TDS.
- For best results, use at a temperature of not below +10°C.
- Before treatment, plastic substrates must be cleaned, dried and degreased. For better adhesion, sand with an abrasive for plastic surfaces.
- Protect the surfaces that are not to be primed.
- The product is ready to use and does not require thinning.
- Apply 1 “wet” coat.
- Equipment for application:
Spray gun type Nozzle, mm Pressure, bar Low pressure (HVLP, LPH and others) 1.3-1.5 1.8-2.0 Medium pressure (RP, HTE, W and others) 1.3-1.5 2.0-2.5 - Drying time before the subsequent coating is applied — 20 min at +20°C.
- Close the container with primer tightly after use.
| Color | Transparent |
|---|---|
| Content | 1000 ml |
| Composition | modified synthetic resins, mixture of petroleum solvents, functional additives |
| Technical Specification | 20.30.22-038-53934955-2021 |
| Shelf Life | 5 years |
| EAN-13 | 4606445047646 |
Дситрий – :
Добрый день, возможно ли нанесение поверх на: грунтовку, шаптлевку и базовую или акриловую краску?
axiom – :
Возможно, но зачем? Эта грунтовка предназначена для нанесения на пластик и повышения адгезии именно к пластику.